Slack Line Set - Dawson Group Ltd.
Model DS-HSL
Slack line is naturally born for balance-training.
Now more and more people are delighted on the new climbing
The slack line can be built at any place where there are two fixed points.
Technical specification：
Capacity：2000kg-3000kg
Belt width:50mm
Length:15m-50m
Color: Orange, yellow or as you required, can be with customerized LOGO printings( max. 4pc printing)
Belt material: 100%Polyester
Quality: GS/TUV approval
Tensioning Device: Normal Ratchet or Long Handle Ergo Ratchet are available
End fittings: different end fittings are available
| Model | Width | Length | Tension Device | End Fittings | M.B.S. | Packaging |
| DS-HSL01 | 50mm | 15m | Standard Ratchet Galvanized | Karabiner Chrome Plated | 3,000KGS | Cloth Pouch or Color Box |
| DS-HSL02 | 50mm | 20m | Standard Ratchet Black coated | Loop End Black Cover | 3,000KGS | Cloth Pouch or Color Box |
| DS-HSL03 | 50mm | 15m | Standard Ratchet Galvanized | Buckle Chrome Plated | 2,000KGS | Cloth Pouch or Color Box |
Instruction： The tensioned slack line mustn’t be higher than 50cm above the ground.
 |  |  |
| DS-HSL01 | DS-HSL02 | DS-HSL03 |
 | Assembly Instructions: The slack line is stretched between two equal fixed points, especially trees with a diameter of about 30cm. Attention should be paid to the tree protection to avoid damage (Pic1) . Insert the two ends of the line on a tree and close the carabiner (Pic.2). Line tensioning: The line should be placed between the two smooth fixed points on the ground (Pic.3). The thread the line through the slot ratchet shaft and pull it as tight as possible (Pic.4). Only then can the line tension be adjusted with the ratchet (Pic.5). |
Send Message
Related Products
